Firmware Release Note

1. Product name: 	WAG54G

2. Product Version: 	V2.0

3. File detail:
Firmware Version:	v1.01.00_001

4. Summary of changes:
000
Release Date:		Jun 16, 2005
1.	For AU, 8M/32M
2.	Fixed NTP sync issue with correct Day Light Savings Time 
3.	Added “PPP Authentication Failed” 
4.	RFC1483Bridged fail to connect to Internet when set with static WAN IP
5.	VPN doesn’t pass traffic under PPPoA 
6.	IPSec Tunnel Crash after 2~4 hours
7.	PPTP Pass-through issue 
8.	Added “:” for PPP password 
9.	Added “modulation selection for G.DMT, T1.413 
10.	Add WLAN APDK 5.7 
11.	Allowed WAN IP to be the same as Gateway IP for RFC1483 Bridged Static mode 
12.	DHCP server will not respond after changing the LAN IP to different subnet 
13.	Using port-scan GRC Shields UP!, numerous ports are showing “closed” instead of stealth
14.	When using RFC1483Routed, the GUI refuses to save the WAN settings when WAN IP have a different subnet than Gateway.  Example:  WAN:  66.10.50.29, Gateway:  66.10.90.1 
15.	 FQDN is used on both side of the VPN tunnel, when the Gateway’s IP is refreshed due to dynamic PPP address, the Gateway tries to re-establish the VPN tunnel through the old WAN IP address rather than the new one.  This can only currently be fixed by clicking the “save” button in the GUI.  
16.	 Remove the word “AES” under the help page of WLAN tab.
17.	 When changing the ATM QoS to VBR, the PPPoA would not establish WAN IP connection
18.	 Maximum PPPOA MTU not able to set to 1500 under manual mode 
19.	 Add timezone +9:30 for South Australia 
20.	 Add Advanced DHCP button for ETSI f/w, but not including Telus STB feature